Electric V Grooving Machine for Rigid Box Sample Making

DG-8010SMV Electric Synchronous V-Slot Proofing Machine

Electric synchronous belt drive | Touch screen control | Automatic limit positioning | Fast V-slot proofing | Support for cutting angles

Introduction

The DG-8010SMV is an Stepper motor + synchronous belt drive.Electric V-slot prototyping machine, mainly used for V-slot grooving and proofing of cardboard, paper jam, gray board, and other special plates.

The equipment moves left and right through the slotting mechanism driven by the synchronous belt, which has fast operation speed and accurate positioning, and can achieve stable and efficient V-slot machining.

Machine equipment.Touch screen control system, automatic front and rear positioning function and programmed height adjustment function.Simply enter the required slotting spacing and machining position to quickly complete the parameter setting, greatly reducing the adjustment time during plate changing and multi-channel slotting.

Particularly suitable for Hard Box Proofing, Packing Box Proofing, Skin Shell Processing and Advertising Plate V-Groove Processing when not held in place by a latch protrusion engaging a flange.

Core Advantages

01 | Electric synchronous belt drive

Adopt Stepper motor + synchronous belt drive structureto drive the grooving mechanism to move left and right.

Compared with the traditional manual adjustment method, the electric drive is faster and more stable, especially suitable for the proofing work that requires multi-channel slotting and frequent specification change.

02 | Touch Screen Control

Equipped with an intuitive touch screen control system, it can be set according to product requirements:

• Grooving position
• Groove spacing
• Process Param
• Number of slots

Simple operation and easy parameter adjustment.

03 | Automatic front and rear positioning

Equipment Automatic front and rear positioning functionto quickly determine the processing position of the cardboard.

Reduce manual measurement and repositioning, and improve position consistency when multi-channel slotting.

04 | Programmed Height Adjustment

The groove height can be programmatically adjusted according to material and product requirements.

Reducing manual and repeated adjustment helps to improve the efficiency of type change between different materials and products.

05 | Rapid multi-slot machining

For products such as hard boxes that require multiple V-slots, leather cases, etc., different slots can be quickly set up through the touch screen.

Reduce plate changing and multi-slot machine adjustment time, improve the efficiency of proofing.

06 | Slotting + Cutting Angle

The equipment can be configured with an angle cutting function to perform angle machining while completing V-groove machining.

One machine meets a variety of proofing needs.

Applicable materials:

The equipment is suitable for a variety of plates, including:

• Cardboard
• Grey board

Material Thickness Range:

250gsm–4mm

Applicable Products

and widely used in:

• Heaven and Earth Cover Box
• Rigid Box
• Gift box
• Wine box
• The Jewel Box
• Cosmetic case
• High-end boxes
• Hardcover bookcase
• Advertising board

Ideal for New product development, sample production, small batch production and multi-specification product proofingwhen not held in place by a latch protrusion engaging a flange.

Product Parameters

Why choose an electric synchronous belt V-slot proofing machine?

✔ Stepper motor + synchronous belt drive

✔ Electric movement, fast and stable operation

✔ Touch screen parameter settings

✔ Automatic front and rear limit positioning

✔ Programmed height adjustment

✔ Grooving accuracy up to 0.1mm

✔ Maximum working width 800mm

✔ Supports 250gsm–4mm material

✔ V-slot and corner machining possible

✔ Particularly suitable for hard box and case proofing

✔ Reduce plate change and multi-slot tuning time

✔ Suitable for multi-spec, low-volume production

Get your proofing plan

Please provide yourProduct pictures, plate size, material thickness, number of slots and slot spacing when not held in place by a latch protrusion engaging a flange.

We can recommend the right equipment model for you based on your product and proofing needs and provide Machine Videos, Technical Parameters and Quoteswhen not held in place by a latch protrusion engaging a flange.